Blueridge BM12MCC Panduan Instalasi - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kipas angin Blueridge BM12MCC. Blueridge BM12MCC 18 halaman. Ceiling cassette indoor air handler
Halaman Cetak
Decorative Panel Installation
Detach the intake grille
Slide the 2 grille hooks toward the
middle of the decoration panel.
1 - Intake grille
2 - Grille hook
Install the decoration panel
•
Align the indicate " " on the decoration panel
to the indicate " " on the unit .
•
Attach the decoration panel to the unit with
the supplied screws as shown in figure below.
1 - Decoration panel
2 - Screws (M5) (supplied with the panel)
Revised 5/14/2020
1
2
Open the intake
grille and remove
Fig 8.2
After installing the decoration panel, ensure that
there is no space between the unit body and
decoration panel. Otherwise air may leak through
the gap and cause dewdrop. See figure below.
Fig 8.1
Mount the intake grille
Ensure that the grille is
properly seated in the
groove of the panel.
5-core wire
Fig 8.6
Fig 8.3
Fasten the control box
lid with 2 screws.
1
2
8
Fig 8.4
10-core wire
Connect the 2 wires
of the decoration
panel to the main
board of the unit.
Leave third wire plug
detached.
Fig 8.7
Close the intake
grille, and close the
2 grille hooks.
Fig 8.8
Page 17