Blueridge BM12MCC Kurulum Kılavuzu - Sayfa 17

Fan Blueridge BM12MCC için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Blueridge BM12MCC 18 sayfaları. Ceiling cassette indoor air handler

Sayfayı Yazdır

Decorative Panel Installation

Detach the intake grille

Slide the 2 grille hooks toward the

middle of the decoration panel.

1 - Intake grille

2 - Grille hook

Install the decoration panel

•

Align the indicate " " on the decoration panel

to the indicate " " on the unit .

•

Attach the decoration panel to the unit with

the supplied screws as shown in figure below.

1 - Decoration panel

2 - Screws (M5) (supplied with the panel)

Revised 5/14/2020

Open the intake

grille and remove

Fig 8.2

After installing the decoration panel, ensure that

there is no space between the unit body and

decoration panel. Otherwise air may leak through

the gap and cause dewdrop. See figure below.

Fig 8.1

Mount the intake grille

Ensure that the grille is

properly seated in the

groove of the panel.

5-core wire

Fig 8.6

Fig 8.3

Fasten the control box

lid with 2 screws.

Fig 8.4

10-core wire

Connect the 2 wires

of the decoration

panel to the main

board of the unit.

Leave third wire plug

detached.

Fig 8.7

Close the intake

grille, and close the

2 grille hooks.

Fig 8.8

 Page 17 