eGauge EG4 Series Panduan Memulai Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Ukur eGauge EG4 Series. eGauge EG4 Series 12 halaman.

Phasing Information

To measure power, the eGauge meter uses

amperage measurements collected by current

transformers (CTs) and voltage phases connected

to the line inputs. Every phase from the service

must be connected to the eGauge, as well as a

neutral. Single/split phase service requires L1 and

L2, while 3-phase service requires L1, L2, and L3.

The phase connected to the L1 line input of

the eGauge meter should be the same as the

system L1, or a "phase mix-up" may occur when

calculating power using the CT measurements

and power measurements will be incorrect.

For more information about phasing and example

diagrams, please visit

eGauge.net/support/phasing.