BlueSky Designs Mount'n Mover Panduan Cepat

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Kursi roda BlueSky Designs Mount'n Mover. BlueSky Designs Mount'n Mover 2 halaman.

Halaman Cetak
quick guide
move
it
This guide describes the basics of setting up your
so that it stops at, moves from, and returns to any desired posi-
tion. For further assistance, please call us at 888-724-7002, or
check out our website for more detailed instructions.
mountnmover.com
attach it
a
b
a: Release "red lock" by rotating clockwise
b: Unlock by pulling out & up on handle (highlighted orange)
c: Lift off by pulling forward and up
Reverse these steps to re-attach to device plate
step 1
attach device to appropriate device plate
attach
it
adjust
mount
it
Mount'n Mover
- detach Quick Release Plate (QRP)
- reattach QRP
- attach device to device plate
c
step 2
attach to quick release plate
move it
Depress
elbow & shoulder joints
Move It from lock position
To find lock position
release downward
pressure on hoop and
move until arm stops
set it
it
Slide
LEVER
unlock the tilt-plate
Position the tilt-plate to the
desired orientation
Slide the LEVER to the
left to lock
set it
initial setup
Flip up all lock tabs so joints move
freely with no lock positions
You cannot unset a lock tab with
the set-screw directly above it
Orient to best fit user needs;
move set-screw to nearest lock tab;
slide lock tabs down to set locks
Locate friction set screw on each joint
Insert a 1/16" hex key
Turn hex key to the right
to increase or to the left
to decrease joint friction
- move shoulder & elbow joints
- rotate wrist joint
- change tilt-plate angle
HOOP
to unlock
Depress
the wrist lock
Move it
Wrist will remain unlocked
until it reaches lock position
to the right to
the tilt-plate
To set custom lock positions:
Align set-screw with desired lock
position and slide lock tab down
fine tune
±5° increments
Push tool into slot until the
shoulder joint releases
Rotate shoulder until desired
orientation is achieved
Remove tool & wiggle joint
until shoulder locks
PADDLE
to release
friction adjustment