BlueSky Designs Mount'n Mover Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Kursi roda BlueSky Designs Mount'n Mover. BlueSky Designs Mount'n Mover 2 halaman.

Halaman Cetak
mount it
Use our Round Clamp for mounting
vertically to round tubing
Our Bridge Clamp provides a
stable mounting solution for
most chairs with round tubing
Bridge Clamp
Frame tubing with through holes
adjust it
Angle Adj. Plate
a
Flip the plate for more
angles (every 7.5°)
c
- step-by-step instructions and mounting options are available at:
- periodically check that all screws are tight
1/4-28 threads
Round Clamp
Channel captures
lock nuts
a, b, & c - post should be vertically oriented for the user's typical upright position (dashed line in a)
d - slots in clamp & post must align
e - post clamp pressure should be set so that, when clamped, the post is held tightly and securely
f - post height set screw ensures repeatable height & safety
Solid Wheelchair Bracket
b
Adjustable Wheelchair Bracket
To adjust post angle (± 5°)
1. Loosen the post angle screw
2. Release clamp lever
3. Rotate post until vertical
4. Tighten the post angle screw
5. Lock clamp lever
1/4-20 threads (T-nut only)
Quantum tiedown
Permobil Unitrack
Back plate has 4 orientations
Storm / TDX & Quantum track
T-nut
& screws
(supplied) have
1/4-20 threads
Post alignment
slot
Post is correctly aligned when the
post and clamp slots are aligned
Quick Guide rev. 2, 10-26-12
www.mountnmover.com
optional
Clamp pressure
+
Post height
f
d
-
e