Ambient Recording ACD 201 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman Ambient Recording ACD 201. Ambient Recording ACD 201 20 halaman.

Halaman Cetak

1. Table of Contents

2.3.9 The Frame (FF) Digits

Display

25 23

Fps

Note:

The framerate displayed is an indication of the dipswitch setting and

cannot be changed by the cursor.

2.3.10 The ct and cd functions

The ct or cd function can be selected in the FF position.The slate must also

be in the generator /RTC mode.

Select ct

When Load is implemented the R T C is set from the generator

time and date.

Select cd

When Load is implemented the R T C is loaded from the current

display time and date. (Set manually)

Select Fps (Dipswitch value shown)

When Load is implemented only the generator is loaded with the

selected data.

2.3.11 Setting the generator

There are three settings of the dipswitches in which the generator is active.

In Generator

On power-up the generator starts counting from 00.00.00.00 .and the

userbits are 00.00.00.00. The Red LED blinks.

Go to set mode. (See 2.3)

Set user bits as above and move cursor to time frame.

Set time value and verify framerate in last 2 digit positions.

To LOAD press both buttons simultaneously till display runs.

Userbits can be loaded without changing time by selecting the

userbits and loading with the cursor in the userbit display.

In Generator / RTC Mode

On power-up the generator is loaded with the RTC time and date

values. The Green LED blinks.

The framerate is as selected by the dipswitches.

The values entered by the RTC will be overidden by a manual set as

above or by jamming from Ext TC.

23.98

29.97

Drop

Frame

Generator Mode

Generator/ RTC Mode

Reader/ Generator Mode

Mode

set

Drop

RTC

Frame Gen. TC Manual Displ.

set

RTC from