Ambient Weather WH31-SRS Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Ukur Ambient Weather WH31-SRS. Ambient Weather WH31-SRS 9 halaman. Temperature and humidity solar radiation shield

Ambient Weather WH31-SRS Panduan Instalasi

4 Tools and Materials Needed

5/16" Wrench
Drill with 1/8" to 9/64" for mount without anchors
Drill with 1/4" to 5/16" for mount with anchors

5 Location Tips

The radiation shield must be placed away from large radiant heat sources, such as sun exposed
buildings.
The radiation shield should be placed in an open area to insure unrestricted air flow or wind.
Do not install over or near sprinklers. Continuous moisture may damage the temperature sensor.

6 Installation Options

There are two different mounting configurations for the radiation shield:
Pole or metal pipe with outside diameter between 1" and 1 ¼"
On the side or top of a wooden post

7 Installation

Step 1. Attach the
mounting arm attachment bracket to the mounting arm.
Horizontal Installation
Figure 1
Version 1.1
©Copyright 2022, Ambient LLC. All Rights Reserved.
Vertical Installation
Figure 2
Page 3