AMCI SMD23-240 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo AMCI SMD23-240. AMCI SMD23-240 14. Integrated stepper drive & motor

ADV ANC ED

MIC RO CON T RO L S INC.

Changing the SMD23 Configuration Settings (continued)

Procedure: (continued)

10. By pressing the Apply button, the new settings will be saved in the drive's

nonvolatile memory. The process of saving and verifying the new settings will take

about 8 seconds. During this time a warning to wait is displayed in the status display

of the window. When the process ends, a message that the command is accepted is

displayed.

11. Pressing the Test On button starts the self test. The motor will move back and forth

quarter of a revolution with slow speed until the Test button is pressed again.

Pressing the Recall button (in the menu above) will display the SMD's current settings in

the data windows.

ERROR MESSAGES:

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786

Tel: (860) 585-1254

Fax: (860) 584-1973

SMD-23 Integrated Stepper Drive & Motor

•

Check if power is applied to the motor;

•

Check the wire connection;

•

Check if the correct COM port is

selected

Web: www.amci.com

;

page: 12