AMCI SMD23-240 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo AMCI SMD23-240. AMCI SMD23-240 14. Integrated stepper drive & motor

ADV ANC ED

MIC RO CON T RO L S INC.

Changing the SMD23 Configuration Settings

Equipment required for changing the drive settings:

•

Power supply – 24 to 75VDC, 4Amps;

•

Programming cable - AMCI CSMD-5, 5 ft serial cable(optional). It connects the drive to a

PC. The connections are described in this document. The drive circuit provides optical

isolation from the PC;

•

PC running Windows 98/2000/XP;

•

AMCI SPI Programming software, downloadable from the AMCI website (www.amci.com);

Procedure:

1. Install the AMCI SPI Programming software on the PC.

2. Connect the programming cable(AMCI part# CSMD-5, optional) to the SMD.

3. Connect the power supply to the same connector (follow the specified polarity).

4. Connect the D-Sub connector of the programming cable to the serial port of the PC.

5. Run the AMCI SPI programming software. The following window will appear on the

screen:

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786

Tel: (860) 585-1254

Fax: (860) 584-1973

SMD-23 Integrated Stepper Drive & Motor

Web: www.amci.com

page: 10