AKSO Cor Tester Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di prova AKSO Cor Tester. AKSO Cor Tester 8.

 Factory Standard – restore the adjustment of the

factory reading curve

LANGUAGE – language selection

PORTUGUESE, ENGLISH and SPANISH.

6. MAINTENANCE

BATTTERY INSTALLATION/REPLACEMENT

When the display displays Dead Battery, replace the

battery as described below:

1) Switch off the instrument by holding down the Power-

Measuring button unit the display is switched off;

2) Remove the base clamping screw at the bottom of the

instrument using a Philips wrench;

3) Undock the base of the meter by pulling it carefully;

4) Remove the used battery from the compartment and

disconnect it from the clip;

5) Connect the new battery in the clip and snap it into the

compartment;

6) Replace the base of the instrument, observing its correct

position;

7) Replace the Philips screw by tightening it without forcing

it.