AKSO Cor Tester Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di prova AKSO Cor Tester. AKSO Cor Tester 8.

9) With the instrument in the VERTICAL position, biefly

press the button, the message Analyzing reference will

appear on the display;

10) Wait until the display displays the Insert sample

message;

Reading – Apparent Color

While Insert sample is on the display:

11) Open the measuring cover and remove the cuvette

from the compartment;

12) With the aid of the syringe, collect al least 15mL of the

sample to be analyzed;

13) With the sample in the syringe, fill in the glass cuvette

(12ml);

14) Close the cuvette with its cover;

15) Clean and dry puter wall of the cuvette using a cleaning

wipe or soft towel paper;

16) Insert the cuvette into the measuring compartment;

17) Measuring alignment: for better accuracy insert the

cuvette always in the same position;

18) Close the measuring cover on the glass cuvette to

avoid interference in the readings;

19) Briefly press the Power-Measuring button and wait.

The display will display the Message Analyzing

Sample, followed by the measurement result in PCU;

20) At the end of the measurement, discard the sample

analyzed and immediately wash the glass cuvette with

the distilled or deionized water.