Ameda HygieniKit Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Tiralatte Ameda HygieniKit. Ameda HygieniKit 14. One-hand manual breast pump, milk collection system with one-hand breast pump adapter and flexishield areola stimulators
Anche per Ameda HygieniKit: Istruzioni per il funzionamento e la pulizia (2 pagine)

Stampa la pagina

If suction is low:

• Check that valve(s) is/are pushed onto breast flange(s).

• Check valve(s) for tears or stretches. Replace if needed.

• If single pumping, check tubing adapter to be sure side not in use is closed.

• Check tubing adapter for cracks. If seen, replace.

• Set pump to higher SUCTION/VACUUM setting.

The valves are vital for proper suction. To work well, they must be intact and look closed

when pump is not in use.

To prolong valve life:

• When removing from breast flange, pull gently from thick sides, not thin edge.

• Do not stick anything into valves during cleaning. Just swish them around in warm, soapy

water, rinse well in warm water, and air dry.

Converting to an Ameda One-Hand Manual Breast Pump

ALWAYS WASH HANDS WELL WITH SOAP AND WATER BEFORE PUMPING.

Assembly

Use this section if your One-Hand handle assembly is part of an Ameda HygieniKit or has

been purchased separately.

Remove plastic covering on handle assembly.

3. Push piston into

upper chamber

of flange.

1. Unsnap and remove adapter cap.

2. Remove diaphragm from upper chamber of breast flange.

4. Pull handle down

and snap handle

collar around

bottom of flange.

(See shaded area

in diagram above.)

5. Screw flange

onto bottle.

Handle is on

correctly if top

of handle is a

straight line.

E N G L I S H