Coastal WEATHERPAK TRx2 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Stazione meteorologica Coastal WEATHERPAK TRx2. Coastal WEATHERPAK TRx2 18.

You will need a large screwdriver to replace the batteries. The battery "plug" is slotted. With the
screwdriver, PUSH (the plug is held in place by a spring), then rotate the plug clockwise
will come out, followed by a spring, and then the batteries. Slide the new batteries in (positive end
first) and replace the spring and plug.
To check the new voltage, set up the WEATHERPAK
Drop down the [MISC] menu to "Processed Sam Data". One of the items shown is battery
voltage. With new batteries installed, it should read between 13 to 15 volts. The tower 'low-
voltage" indicator will stop flashing.
8-4

TROUBLESHOOTING

Do not take the WEATHERPAK
If the procedures below do not solve the problem, call Coastal Environmental Systems' Service
Department: (800) 488-8291 x157.
8-4.1
THE WEATHERPAK
When the WEATHERPAK
begins sampling the atmospheric conditions; it then transmits weather data every 30 seconds. If it
does not, check the following, in this order:
Confirm that the WEATHERPAK
tripod tower.
Check the batteries in the tower. Use only high quality alkaline batteries. (Do not use
rechargeable batteries)
8-4.2
THE RECEIVER/DISPLAY
Is the Receiver box on?
The power indicator light should be on and the display characters visible. If this is not the case,
check the following:
Be sure the receiver unit is plugged in and turned on.
Check the power at the outlet.
P/N: 0302-117-002 Rev. C
Figure 6 – Battery Replacement
or the Receiver/Display box apart
system is assembled, it automatically powers up, finds True North and
is properly secured in the KamLock connector on the
.
WEATHERPAK
and then open the ALOHA
; this will void the warranty.
®
TRx 2
User's Manual
. The plug
®
plume model.
13