Coastal WEATHERPAK TRx2 Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Stazione meteorologica Coastal WEATHERPAK TRx2. Coastal WEATHERPAK TRx2 18.
Stampa la pagina8-4.3
DATA LIGHT
Data light not flashing?
Every 30 seconds (approximately), the red data light will flash, signifying that the WEATHERPAK
is sending data to the Receiver/Display. If the light does not flash, then do the following:
•
Be sure the receiver unit is plugged in and turned on. Check the power indicator light on
the "on/off" switch on the front panel.
•
Check to see if the WEATHERPAK
by an obstruction (hills, vehicles, steel buildings, etc.)
•
Check to see that both the WEATHERPAK
connected.
•
Reset the system by removing the WEATHERPAK
tower. Wait 10 seconds, and then replace the WEATHERPAK
•
Check to see if the "low tower battery" indicator is flashing (flashing "T" on the display
screen). Replace batteries if necessary.
•
Assure the batteries in the tower are properly aligned (positive towards the top of the tower).
8-4.4
THE COMPUTER
There is data on the display but no data on the computer.
•
Check all the connections from the receiver to the computer.
Error messages while running plume model.
These are not related to the use of the WEATHERPAK
.
modeling software
•
Consult the CAMEO
•
Contact Coastal Environmental Systems as a last resort. We are not certified
®
CAMEO
/ALOHA
P/N: 0302-117-002 Rev. C
is "line-of-sight" (less than 5 - 7 miles, and not blocked
®
®
/ALOHA
website:
®
representatives, but we may be able to help.
antenna and the receiver antenna are securely
®
from the KamLock connector on the
; these are coming from the plume
www.epa.gov/emergencies/content/cameo
®
WEATHERPAK
User's Manual
on the tower.
TRx 2
14