Aktobis WDH-FGA1075 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Condizionatore d'aria Aktobis WDH-FGA1075. Aktobis WDH-FGA1075 12.

Functional description of the control panel:

1. On / Off buttona

2. Setting the operating mode b

3. Setting the operating strength

4. TIMER (remaining time/start time 1-24 hrs.)

5. DOWN button to lower the room temperature

6. UP button to increase the room temperature

7. SLEEP = silent night operationf

Instructions for use:

1. Commissioning

1.1.

Insert the mains plug properly into the socket.

1.2.

Check that the exhaust hose for the warm exhaust air is properly installed (see page 4-5 of the instructions

for use).

1.3.

Make sure that the horizontally mounted outlet louvres are open towards the desired direction.

1.4.

Press the ON/OFF switch. The air conditioner switches on and the default setting Automatic mode with

medium operating strength starts to work. The default target temperature is 24°C. At the same time, the

operation/signal lights turn on. (Note: The room temperature display panel can display values from 0°C to

50°C. )

. Display field (temperature etc.)

. Receiver diode for the remote control

c. Signal light for high operating strength (H)

d. Signal light for average operating strength (M)

d. Signal light for low operating strength (L)

e. Signal light when automatic mode is activated

. Signal light when cooling mode is activated

g. Signal light when fan operation is activated

h. Signal light during dehumidification operation

i. Signal light when heating mode is activated

j. Signal light when the water tank is full

k. Signal light for active compressor operation

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

(inactive on this unit type).