American Standard Lakeland Undercabinet Storage Rack 8193.140 Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Arredamento per interni American Standard Lakeland Undercabinet Storage Rack 8193.140. American Standard Lakeland Undercabinet Storage Rack 8193.140 2. American standard lakeland undercabinet storage rack installation instructions
Stampa la pagina3
• Place one anti-shake and then one flat washer on two long and two short screws. (Extra included in pack.)
4
• Position the rack under the sink and secure in place with the screws. Fig.5
Note: The long screws go to the right hand side (outer edge) and the short screws go to the left hand side (center)
when looking from the front. Fig.6
Fig.5
5
• Gently tighten the screws.DO NOT OVER TIGHTEN THE SCREWS AS THIS MAY BREAK THE WELD NUT
• If a clip is not tight on the wire, remove the screw and add more flat washers until the clip grips the wire. Fig.7.
© A M E R I C A N S T A N D A R D I N C . 2 0 0 5
Fig.4
Long Screws
Fig.7
Fig.6
Fixing Screw
Hole Locations
Short Screws
Flat Washers
Clips
Anti-shake Washer
Long Screws
Short Screws
7 9 1 4 0 7 - 1 0 0