American Standard Lakeland Undercabinet Storage Rack 8193.140 Installation Instructions - Page 2
Browse online or download pdf Installation Instructions for Indoor Furnishing American Standard Lakeland Undercabinet Storage Rack 8193.140. American Standard Lakeland Undercabinet Storage Rack 8193.140 2 pages. American standard lakeland undercabinet storage rack installation instructions
3
• Place one anti-shake and then one flat washer on two long and two short screws. (Extra included in pack.)
4
• Position the rack under the sink and secure in place with the screws. Fig.5
Note: The long screws go to the right hand side (outer edge) and the short screws go to the left hand side (center)
when looking from the front. Fig.6
Fig.5
5
• Gently tighten the screws.DO NOT OVER TIGHTEN THE SCREWS AS THIS MAY BREAK THE WELD NUT
• If a clip is not tight on the wire, remove the screw and add more flat washers until the clip grips the wire. Fig.7.
© A M E R I C A N S T A N D A R D I N C . 2 0 0 5
Fig.4
Long Screws
Fig.7
Fig.6
Fixing Screw
Hole Locations
Short Screws
Flat Washers
Clips
Anti-shake Washer
Long Screws
Short Screws
7 9 1 4 0 7 - 1 0 0