Ekinex EK-EH2-TP-RW Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di registrazione Ekinex EK-EH2-TP-RW. Ekinex EK-EH2-TP-RW 4. 6-fold knx pushbutton
Stampa la pagina
Rockers
Three-positions rockers with central neutral position have
to be mounted on the pushbutton. Pushing one side of
a rocker (for example the upper one), the pushbutton
sends on the bus a telegram for switching on, increasing
the brightness of luminaires or raising the blinds, while
pushing the other side (for example the lower one), it sen-
ds a telegram for switching off, reducing the brightness of
luminaires or lowering the blinds. Each channel is equip-
ped with LEDs which can be freely programmed as status
feedbacks of the loads and as orientation nightlight.
Code *
Material
EK-TQQ-GAx
plastic
EK-TQQ-GBx
metal
EK-TRO-GAx
plastic
EK-TRO-GBx
metal
(*) It has to be completed with the extension for the colour choosed (x)
i
Note. The application program allows to configure
the pushbutton with a combination of square and
rectangular rockers. For the allowed combinations
see the application manual or the application pro-
gram for ETS.
Customization of rockers
The rockers can be customized with symbols and texts,
for more information see the standard library on the eki-
nex
catalog or the website www.ekinex.com. On request
®
it is also possible a customization with symbols and texts
chosen by the customer.
Frame
The device is completed with a rectangular frame of the
form (EK-FOR-...) or flank (EK-FLR-...) series.
Code *
Material
EK-FOR-GAx
plastic
EK-FOR-GBx
metal
EK-FLR-GAx
plastic
EK-FLR-GBx
metal
(*) It has to be completed with the extension for the colour (x)
Mounting
The device has degree of protection IP20, and is therefo-
re suitable for use in dry interior rooms. The installation of
the device requires the following steps:
a) fix the metallic support (5) with the screws supplied
(6) on the wall box (7) provided with suitable fixing holes;
b) snap a rectangular frame (4) of the form or flank series,
inserting it from the rear of the device (3);
c) enter the bus terminal, previously connected to the bus
cable in its slot on the rear side (see also: "Connection
of the KNX bus line"). At this point it is recommended to
carry out the commissioning of the device (see also "Con-
figuration and commissioning") or at least the download of
the physical address;
Modularity
Package
[mm]
4 pcs.
40 x 40
square
4 pcs. rec-
80 x 20
tangular
Dimens.
Package
[mm]
1 pcs.
126 x 86
1 pcs.
135 x 80
1
2
3
1) Rockers (to be ordered separately)
2) Screws to fasten the pushbutton on the metallic support
3) 6-fold pushbutton
4) Frame of the series form or flank (to be ordered separately)
5) Metallic support for mounting wall box
6) Screws for fixing the support on the wall box
7) Flush-mounting box
d) mounting the device (3) on the metallic support sup-
plied (5) with the screws (2). The correct mounting of the
device occurs when the bus terminal is located in the lo-
wer part; for mounting the device follow also the indication
TOP (arrow tip pointing up) on the rear side of the device.
e) snap the six rockers (1) on the device.
The 6-fold pushbutton can be mounted on a round or a
square (60 mm hole centres) or a rectangular (83,5 mm
hole centres) flush-mounting box. If necessary, the me-
tallic support for mounting on the wall box can also be
ordered separately using the code EK-SMR.
i
Note. The screws supplied in the package are su-
itable for standard installations. For more specific
applications, where the screws have to be replaced,
only flat-head screws must be used.
Note. The screws for the metal support must be
tightened with a max. torque of 1.0 Nm.
Mounting of rockers
For the mounting of the rockers on the dedicated seats,
the fixing elements must be aligned vertically.
Switching, display and connection elements
The device is equipped with mechanisms for switching, 2
LEDs for each channel, a programming LED and a pro-
gramming pushbutton and a terminal block for connection
of the bus line.
Switching elements
• Pushbutton (3) for switching between the normal and
programming operating mode
• Mechanisms (4) for independent switching of single or
group of loads (to be completed with square rockers)
2
4
5
7
6
Mounting
not allowed
(fixing
elements
aligned
horizontally)