Akuvox R29C-L Suggerimenti per l'installazione - Pagina 5
Sfoglia online o scarica il pdf Suggerimenti per l'installazione per Controllori di accesso IP Akuvox R29C-L. Akuvox R29C-L 5.
Anche per Akuvox R29C-L: Manuale rapido (16 pagine)
Stampa la pagina
4.
Installation
1. Connect Ethernet to the available ports or use the mobile communication
network.
2.
Connect the panel's relays to the building's door strike.
3. Connect Panel to Power Supply OR> UPS > Wall Outlet.
The Panel will start up like a computer. After loading, you should see the
Akuvox software.
5.
Test Relays
1. In the Dial interface, press "9999"->"Dial key"->"3888"->"OK" to enter the
system setting.
2. Press "RFCard"->"Add Card" to add RF Card by putting the which near the
RF card reader.
3. Back to home page to place the predefined RF card in RF card reader to
unlock.
If successful, you will hear a chime "Welcome, please coming" from the panel
and see a message "Opening door succeeded" on the panel. The door strike
(or other connected system) should respond
Tip：For more installation details, please refer to the Quick Guide.
3