Akuvox R29C-L Installation Tips - Page 5

Browse online or download pdf Installation Tips for IP Access Controllers Akuvox R29C-L. Akuvox R29C-L 5 pages.
Also for Akuvox R29C-L: Quick Manual (16 pages)

Print Page

Installation

1. Connect Ethernet to the available ports or use the mobile communication

network.

Connect the panel's relays to the building's door strike.

3. Connect Panel to Power Supply OR> UPS > Wall Outlet.

The Panel will start up like a computer. After loading, you should see the

Akuvox software.

Test Relays

1. In the Dial interface, press "9999"->"Dial key"->"3888"->"OK" to enter the

system setting.

2. Press "RFCard"->"Add Card" to add RF Card by putting the which near the

RF card reader.

3. Back to home page to place the predefined RF card in RF card reader to

unlock.

If successful, you will hear a chime "Welcome, please coming" from the panel

and see a message "Opening door succeeded" on the panel. The door strike

(or other connected system) should respond

Tip：For more installation details, please refer to the Quick Guide.