Door Knox VDP103 Manuale - Pagina 13
Sfoglia online o scarica il pdf Manuale per Sistema interfonico Door Knox VDP103. Door Knox VDP103 15.
4.3
Installation
When mounting the door entry camera we recommend that it is installed between 150 to
160cm above the floor
(About 5 feet) and where it will not be in direct sunlight. If you choose to recess mount the
camera you will need
to create a recess of 200mm (h) x 96mm (w) x 29mm (d). It is important that the recess
created is no more than
30mm deep as you will not be able to secure the camera
4.4
Anti-Tamper Alarm
The VDP103 has an anti-tamper alarm built in.
The alarm is triggered if the VDP103 is moved when powered up but may also triggered if
the VDP103 is not vertical.
To avoid this the top of the VDP103 just needs to be raised slightly.
The alarm will reset after one minute but may retrigger if still not vertical or if moved.
Disabling the Anti-Tamper Alarm
Hold down the Call button when powering on (five beeps) then release the call button.
Anti-Tamper is now disabled until the power is cycled.
© 2020 System Q Ltd
Appendix
13