Door Knox VDP103 Podręcznik - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik dla System interkomu Door Knox VDP103. Door Knox VDP103 15 stron.

4.3

Installation

When mounting the door entry camera we recommend that it is installed between 150 to

160cm above the floor

(About 5 feet) and where it will not be in direct sunlight. If you choose to recess mount the

camera you will need

to create a recess of 200mm (h) x 96mm (w) x 29mm (d). It is important that the recess

created is no more than

30mm deep as you will not be able to secure the camera

4.4

The VDP103 has an anti-tamper alarm built in.

The alarm is triggered if the VDP103 is moved when powered up but may also triggered if

the VDP103 is not vertical.

To avoid this the top of the VDP103 just needs to be raised slightly.

The alarm will reset after one minute but may retrigger if still not vertical or if moved.

Disabling the Anti-Tamper Alarm

Hold down the Call button when powering on (five beeps) then release the call button.

Anti-Tamper is now disabled until the power is cycled.

Appendix