Canon PIXMA MX410 Series Risoluzione dei problemi di configurazione della rete - Pagina 8

Sfoglia online o scarica il pdf Risoluzione dei problemi di configurazione della rete per Stampante All in One Canon PIXMA MX410 Series. Canon PIXMA MX410 Series 46. Cartridge reset
Anche per Canon PIXMA MX410 Series: Manuale di installazione della rete (23 pagine), Specifiche tecniche (2 pagine), Manuale delle funzioni (30 pagine), Manuale delle funzioni (21 pagine), Manuale delle funzioni (15 pagine), Manuale di configurazione della rete (24 pagine), Manuale di configurazione della rete (20 pagine), Menu manuale (34 pagine), Manuale (14 pagine), Manuale (4 pagine)

Problems during Network Setup

Action

The message appears when multiple access points are

detected. Wait for a while, then configure the settings

again.

Check

The message appears when an error occurs. Check the

access point settings, then configure WPS settings again.

•

For details on how to check the settings of the access point, refer to the manual supplied with the

access point or contact its manufacturer.

•

For the procedure to configure WPS settings of the machine, refer to "Wireless Setup Using WPS

(Wi-Fi Protected Setup)" in the printed manual: Getting Started.

•

When using an access point that does not support WPS, configure the settings by referring to "7

Set Up a Wireless Connection" in the printed manual: Getting Started.

Action

The message appears when setup is not completed within

10 minutes. Follow the procedure below to configure WPS

settings again.

Select PIN code method on the WPS screen, then press the OK button.

•

A new PIN code appears.

Set the new PIN code to the access point or computer.

•

For details on how to set PIN codes to the access point or computer, refer to the manual

supplied with your access point or contact its manufacturer.