Canon PIXMA MX512 Manuale di configurazione - Pagina 21

Sfoglia online o scarica il pdf Manuale di configurazione per Stampante All in One Canon PIXMA MX512. Canon PIXMA MX512 22. Guide for printer setup for network [spanish version]
Anche per Canon PIXMA MX512: Manuale introduttivo (4 pagine), Manuale di installazione (7 pagine), Manuale di configurazione (3 pagine), Impostazione del fax (2 pagine), Specifiche (2 pagine), Impostazione (29 pagine), Manuale di installazione (17 pagine), Manuale (4 pagine), (Inglese) Guida alla configurazione (22 pagine)

The device may not be able to connect to the network in the following cases:



If the DHCP function of the access point is inactive, enable the DHCP function or specify the IP address (IPv4 only)

of the printer and conﬁ gure wireless connection settings again. In addition, make sure that the selected WEP key

number and entered WEP key are correct.

For details on how to check or change the settings of the access point, refer to the manual supplied with the access

point or contact its manufacturer.

To specify the IP address of the printer, follow the procedure below.

1. Press the MENU button.

2. Select Setup, then press the OK button.

3. Select Device settings, then press the OK button.

4. Select LAN settings, then press the OK button.

5. Select Other setup, then press the OK button.

6. Select TCP/IP settings, then press the OK button.

7. Select IPv4, then press the OK button.

8. Select Yes, then press the OK button.

9. Select IP address, then press the OK button.

10. Select Manual setup, then press the OK button.

Follow the on-screen instructions to proceed with settings.

When the setup is complete, press the MENU button.

To perform Advanced setup again



1. Press the MENU button (A).

2. Use the

buttons (B) to select Wireless LAN setup, then press the OK button.