Canon PIXMA MX512 Manuale di configurazione - Pagina 20

Sfoglia online o scarica il pdf Manuale di configurazione per Stampante All in One Canon PIXMA MX512. Canon PIXMA MX512 22. Guide for printer setup for network [spanish version]
Anche per Canon PIXMA MX512: Manuale introduttivo (4 pagine), Manuale di installazione (7 pagine), Manuale di configurazione (3 pagine), Impostazione del fax (2 pagine), Specifiche (2 pagine), Impostazione (29 pagine), Manuale di installazione (17 pagine), Manuale (4 pagine), (Inglese) Guida alla configurazione (22 pagine)

Stampa la pagina
Canon PIXMA MX512 Manuale di configurazione
WEP
Failed to connect to the access point. Check the access point settings and try again.
Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2, 3
or 4 of the access point, set to use WEP key number 1, or select a WEP key number by entering wireless connection
settings of the printer directly.
For details on how to change the WEP key number of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
If the problem is not resolved, there may be other causes.
See also the sections below:
If the DHCP function of the access point is inactive, enable the DHCP function and confi gure wireless connection
settings again.
For details on how to check or change the settings of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
If using an access point that automatically creates WEP keys, check the WEP key (hexadecimal) created
automatically on the access point, then enter it on the printer.
For details on how to check the specifi cations of the access point, refer to the manual supplied with the access point
or contact its manufacturer.
WLAN setting list
If the MAC address fi ltering is enabled on the access point, change settings so that the MAC address of the printer
will be accepted.
Follow the procedure below to check the MAC address of the printer.
1. Press the MENU button.
2. Select Setup, then press the OK button.
3. Select Device settings, then press the OK button.
4. Select LAN settings > Confi rm LAN settings > WLAN setting list to check MAC address.
For details on how to change the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
Select Directly enter the access point name in the Select access point screen. Wireless connection settings of the
access point can be entered on the printer directly.
The WEP Key is Not Displayed Automatically
Refer to the manual supplied with the access point or contact its manufacturer.