Canon PIXMA MX512 설정 매뉴얼 - 페이지 20

{카테고리_이름} Canon PIXMA MX512에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX512 22 페이지. Guide for printer setup for network [spanish version]
Canon PIXMA MX512에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (4 페이지), 설치 매뉴얼 (7 페이지), 설정 매뉴얼 (3 페이지), 팩스 설정 (2 페이지), 사양 (2 페이지), 설정 (29 페이지), 설치 매뉴얼 (17 페이지), 매뉴얼 (4 페이지), (영어) 구성 가이드 (22 페이지)

Canon PIXMA MX512 설정 매뉴얼
WEP
Failed to connect to the access point. Check the access point settings and try again.
Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2, 3
or 4 of the access point, set to use WEP key number 1, or select a WEP key number by entering wireless connection
settings of the printer directly.
For details on how to change the WEP key number of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
If the problem is not resolved, there may be other causes.
See also the sections below:
If the DHCP function of the access point is inactive, enable the DHCP function and confi gure wireless connection
settings again.
For details on how to check or change the settings of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
If using an access point that automatically creates WEP keys, check the WEP key (hexadecimal) created
automatically on the access point, then enter it on the printer.
For details on how to check the specifi cations of the access point, refer to the manual supplied with the access point
or contact its manufacturer.
WLAN setting list
If the MAC address fi ltering is enabled on the access point, change settings so that the MAC address of the printer
will be accepted.
Follow the procedure below to check the MAC address of the printer.
1. Press the MENU button.
2. Select Setup, then press the OK button.
3. Select Device settings, then press the OK button.
4. Select LAN settings > Confi rm LAN settings > WLAN setting list to check MAC address.
For details on how to change the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
Select Directly enter the access point name in the Select access point screen. Wireless connection settings of the
access point can be entered on the printer directly.
The WEP Key is Not Displayed Automatically
Refer to the manual supplied with the access point or contact its manufacturer.