Canon PIXMA MX700 Series Manuale di servizio - Pagina 26

Sfoglia online o scarica il pdf Manuale di servizio per Stampante All in One Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 44. Office all-in-one printer
Anche per Canon PIXMA MX700 Series: Manuale di pulizia (7 pagine), Manuale di configurazione della rete (32 pagine), Manuale supplementare (6 pagine), Istruzioni per la configurazione (2 pagine), Opuscolo e specifiche (2 pagine), Informazioni tecniche (2 pagine)

MX700

3-3. Adjustment / Settings

1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in

the photo below).

2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to

dislocation of the belt or gear, or out-of-phase motor, etc.) occurs.

The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.

DO NOT loosen them in other cases.

Perform the following adjustments when attaching the carriage rail:

1) Before loosening the screws, mark the following positions on the rail:

Left side: Mark the boss position.

2) In attaching the carriage rail, make sure that the left boss and right hole fit to the marks made in step 1) respectively, then fasten

the screws.

3) Be sure to perform the confirmation test detailed below; confirm that the print quality is proper and the print head is not contacting

the paper.

Right side: Mark the hole position.

24 / 41

TABLE OF CONTENTS