Akva-Stabil Effect-Line Manuale di istruzioni per il montaggio - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni Akva-Stabil Effect-Line. Akva-Stabil Effect-Line 12. Aquarium racks

Stampa la pagina

Remove the protective paper from the double-sided tape.

Clean the plastic sheets carefully and mount them on the

rear of all aquariums.

Carefully move the aquariums into position. Remember

to work from your layout plan.

NB. If a pipe system is mounted, all aquariums in the

same section must be of the same type.

Position a white pad under

each corner of all aquari-

ums.

The white pad must be

ﬂush with the outside

edges of the aquarium. Pull

the aquariums forward all

the way to the front edge of

the shelving unit.

If no pipe system is mount-

ed, seal the holes with the

plugs.

Remove the nut and the

white washer from the

return pipes.

Carefully guide the return pipes behind the shelving unit.

Push the bushings up

through the holes in the

base glass of the aquari-

ums.

The rubber gasket and cap

will sit inside the aquari-

um.

There may be 2 gaskets on

certain bushings. These are

for adjustment purposes

and must be left in posi-

tion.

Mount the white washers

and screw the nuts onto the

bushings.