Astralpool 1800 Series Manuale di installazione e istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Pompa per piscina Astralpool 1800 Series. Astralpool 1800 Series 19.

Astralpool 1800 Series Manuale di installazione e istruzioni per l'uso
150 Lbs. of sand. Be sure the
standpipe assembly remains centered
while pouring the sand. Now remove
the standpipe cover and place the
diverter on top of the fi lter basket.
DIAL VALVE INSTALLATION: Carefully remove all sand
DIAL VALVE INSTALLATION: Carefully remove all sand
particles from the mounting location, being especially
particles from the mounting location, being especially
careful of the O-ring groove. Position the O-ring around
careful of the bolt holes and O-ring groove. Position the O-
the bottom of the multiport. Place valve on tank and rotate
ring in the groove. Place valve on tank and rotate until the
until the valve inlet (marked "PUMP") is approximately in
valve inlet (marked "PUMP") is approximately in line with
line with the pump outlet opening. Install the V-clamp set
to connect the multiport to the fi lter body. Install pressure
the pump outlet opening. Install the hex-head bolts and
gauge, after wrapping brass threads with 4 wraps of tefl on
tighten uniformly, being careful not to OVERTIGHTEN.
tape.
Install pressure gauge, after wrapping brass threads with
NOTE: Selector Valve is equipped with a sight glass
4 wraps of teflon tape.
which must be HANDTIGHT only.
❖ NOTE: Seven position valves are equipped with a sight
Some pressure gauges come with tefl on tape factory
glass which must be HANDTIGHT only.
installed.
❖ S
ith t fl
t
f
t
5
Setting up your system: