Astralpool 1800 Series Руководство по установке и эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Насос для плавательного бассейна Astralpool 1800 Series. Astralpool 1800 Series 19 страниц.

Печатать страницу

Astralpool 1800 Series Руководство по установке и эксплуатации

150 Lbs. of sand. Be sure the

standpipe assembly remains centered

while pouring the sand. Now remove

the standpipe cover and place the

diverter on top of the ﬁ lter basket.

DIAL VALVE INSTALLATION: Carefully remove all sand

particles from the mounting location, being especially

careful of the O-ring groove. Position the O-ring around

careful of the bolt holes and O-ring groove. Position the O-

the bottom of the multiport. Place valve on tank and rotate

ring in the groove. Place valve on tank and rotate until the

until the valve inlet (marked "PUMP") is approximately in

valve inlet (marked "PUMP") is approximately in line with

line with the pump outlet opening. Install the V-clamp set

to connect the multiport to the ﬁ lter body. Install pressure

the pump outlet opening. Install the hex-head bolts and

gauge, after wrapping brass threads with 4 wraps of teﬂ on

tighten uniformly, being careful not to OVERTIGHTEN.

tape.

Install pressure gauge, after wrapping brass threads with

NOTE: Selector Valve is equipped with a sight glass

4 wraps of teflon tape.

which must be HANDTIGHT only.

❖ NOTE: Seven position valves are equipped with a sight

Some pressure gauges come with teﬂ on tape factory

glass which must be HANDTIGHT only.

installed.

❖ S

ith t fl

Setting up your system: