AMES Maxim M200 Series Installazione, assistenza, kit di riparazione, manutenzione

Sfoglia online o scarica il pdf Installazione, assistenza, kit di riparazione, manutenzione per Unità di controllo AMES Maxim M200 Series. AMES Maxim M200 Series 4. Double check valve/detector assemblies, sizes 2 1/2"-10" 65-250 mm

Maxim
Series M200/M300
Double Check Valve
Assemblies
Double Check Detector
Assemblies
1
Sizes: 2
" – 10" (65 – 250mm)
2
• Installation
• Service
• Repair Kits
• Maintenance
Installation Note: Due to shipping, storage,
and general handling, the Victaulic Coupling
for the shutoff valves may have loosened
and should be retightened during installation.
A Division of Watts Regulator Company
875 National Drive • Suite #107 • Sacramento, CA 95834 • Phone: 916-928-0123 • Fax: 916-928-9333
Ames product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames
Technical Service. Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any
obligation to make such changes and modifications on Ames products previously or subsequently sold.
For other repair kits and service parts,
send for Ames Repair Parts Price List,
PL-A-RP-BPD.
For technical assistance, contact your
local Ames representative.
IMPORTANT: Inquire with governing
authorities for local installation requirements.
NOTE: For Australia and New Zealand, line
strainers should be installed between the
upstream shutoff valve and the inlet of the
backflow preventer.
Its important that this device be tested
periodically in compliance with local codes,
but at least once per year or more as service
conditions warrant. If installed on a fire
sprinkler system, all mechanical checks,
such as alarm checks and backflow
preventers, should be flow tested and
inspected internally in accordance with
NFPA 13 and NFPA 25.
Limited Warranty: Ames Company warrants each
product to be free from defects in material and
workmanship under normal usage for a period of one
year from the date of original shipment. In the event
of such defects within the warranty period, the
Company will, at its option, replace or recondition
the product without charge. This shall constitute the
sole and exclusive remedy for breach of warranty,
and the Company shall not be responsible for any
incidental, special or consequential damages,
including without limitation, lost profits or the cost
RP/IS-A-M200/M300
M200 OSY
of repairing or replacing other property which is
damaged if this product does not work properly,
other costs resulting from labor charges, delays,
vandalism, negligence, fouling caused by foreign
material, damage from adverse water conditions,
chemical, or any other circumstances over which the
Company has no control. This warranty shall be
invalidated by any abuse, misuse, misapplication or
improper installation of the product. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Any implied
warranties that are imposed by law are limited in
duration to one year.
Some States do not allow limitations on how long
an implied warranty lasts, and some States do not
allow the exclusion or limitation of incidental or
consequential damages. Therefore the above
limitations may not apply to you. This Limited
Warranty gives you specific legal rights, and you
may have other rights that vary from State to
State. You should consult applicable state laws to
determine your rights.