AMES Maxim M200 Series Installation, Service, Repair Kits, Maintenance

Browse online or download pdf Installation, Service, Repair Kits, Maintenance for Control Unit AMES Maxim M200 Series. AMES Maxim M200 Series 4 pages. Double check valve/detector assemblies, sizes 2 1/2"-10" 65-250 mm

Print Page

™

Maxim

Series M200/M300

Double Check Valve

Assemblies

Double Check Detector

Assemblies

Sizes: 2

⁄

" – 10" (65 – 250mm)

• Installation

• Service

• Repair Kits

• Maintenance

Installation Note: Due to shipping, storage,

and general handling, the Victaulic Coupling

for the shutoff valves may have loosened

and should be retightened during installation.

A Division of Watts Regulator Company

875 National Drive • Suite #107 • Sacramento, CA 95834 • Phone: 916-928-0123 • Fax: 916-928-9333

Ames product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames

Technical Service. Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any

obligation to make such changes and modifications on Ames products previously or subsequently sold.

For other repair kits and service parts,

send for Ames Repair Parts Price List,

PL-A-RP-BPD.

For technical assistance, contact your

local Ames representative.

IMPORTANT: Inquire with governing

authorities for local installation requirements.

NOTE: For Australia and New Zealand, line

strainers should be installed between the

upstream shutoff valve and the inlet of the

backflow preventer.

Its important that this device be tested

periodically in compliance with local codes,

but at least once per year or more as service

conditions warrant. If installed on a fire

sprinkler system, all mechanical checks,

such as alarm checks and backflow

preventers, should be flow tested and

inspected internally in accordance with

NFPA 13 and NFPA 25.

Limited Warranty: Ames Company warrants each

product to be free from defects in material and

workmanship under normal usage for a period of one

year from the date of original shipment. In the event

of such defects within the warranty period, the

Company will, at its option, replace or recondition

the product without charge. This shall constitute the

sole and exclusive remedy for breach of warranty,

and the Company shall not be responsible for any

incidental, special or consequential damages,

including without limitation, lost profits or the cost

RP/IS-A-M200/M300

M200 OSY

of repairing or replacing other property which is

damaged if this product does not work properly,

other costs resulting from labor charges, delays,

vandalism, negligence, fouling caused by foreign

material, damage from adverse water conditions,

chemical, or any other circumstances over which the

Company has no control. This warranty shall be

invalidated by any abuse, misuse, misapplication or

improper installation of the product. THIS

WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. Any implied

warranties that are imposed by law are limited in

duration to one year.

Some States do not allow limitations on how long

an implied warranty lasts, and some States do not

allow the exclusion or limitation of incidental or

consequential damages. Therefore the above

limitations may not apply to you. This Limited

Warranty gives you specific legal rights, and you

may have other rights that vary from State to

State. You should consult applicable state laws to

determine your rights.