AIR GAP AG250-002 Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Unità di controllo AIR GAP AG250-002. AIR GAP AG250-002 4. Cold/hot potable water valve

VALVE TO PEDAL CONNECTION (SEE FIG. 2)

Unscrew the front nut (1) and insert the cable (4) through the slot

cable support bracket. See pedal instructions for more details and

exact slot location. The rear nut (3) remains at the end of the thread

(2). Adjust cable holder (2) for proper pedal operation and secure

it's position with nuts (1) and (3).Use 3/32 wrench for tightening

nuts(M5x0.8mm).

Verify that the actuating cable is inside the valve recepticle; see

Fig.3

Insert cable end T-bar (5) into the pedal lever ( see instruction for

pedal )

FIG. 2

FIG. 3

CAUTION:

During installation, avoid unnecessary bends of the actuating cable.

The AG250-002 valve is maintenance-free.

500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]

AG250-002

Model:

TAP-A-FLOW™

COLD/HOT POTABLE

WATER VALVE

Part No.

AG250-002

Doc. # 400-0766-002

Placentia, California