AIR GAP AG250-002 Инструкция
Просмотреть онлайн или скачать pdf Инструкция для Блок управления AIR GAP AG250-002. AIR GAP AG250-002 4 страницы. Cold/hot potable water valve
Печатать страницуVALVE TO PEDAL CONNECTION (SEE FIG. 2)
Unscrew the front nut (1) and insert the cable (4) through the slot
1.
cable support bracket. See pedal instructions for more details and
exact slot location. The rear nut (3) remains at the end of the thread
(2). Adjust cable holder (2) for proper pedal operation and secure
it's position with nuts (1) and (3).Use 3/32 wrench for tightening
nuts(M5x0.8mm).
Verify that the actuating cable is inside the valve recepticle; see
2.
Fig.3
Insert cable end T-bar (5) into the pedal lever ( see instruction for
3.
pedal )
3
FIG. 2
FIG. 3
CAUTION:
During installation, avoid unnecessary bends of the actuating cable.
The AG250-002 valve is maintenance-free.
500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]
2
5
4
1
Copyright 2018 AIR GAP INTERNATIONAL
AG250-002
Model:
TAP-A-FLOW™
COLD/HOT POTABLE
WATER VALVE
Part No.
AG250-002
Doc. # 400-0766-002
Placentia, California