Canon iR1018 Procedura di installazione - Pagina 16

Sfoglia online o scarica il pdf Procedura di installazione per Scanner Canon iR1018. Canon iR1018 20. Ir1018/1022 series ir2018/2030 series
Anche per Canon iR1018: Opuscolo e specifiche (8 pagine), Manuale di servizio (29 pagine)

Stampa la pagina

Chapter 1　

When tightening the screws, take care not to damage

the repeating harness A.

11) Slide the card reader cover [1] to attach it to the

card reader mount.

F-1-17

Route the repeating wire A [1] as shown below.

F-1-18

12) Using the supplied binding screw (M4x6)[1], se-

cure the card reader cover [2].

[1]

F-1-19

13) Connect the connector of the repeating harness A

[1] to the connector J317 [2] on the image processor

PCB.

[2]

F-1-20

14) Form the repeating harness A [1] into four loops

with a diameter of about 4 cm (B), and then bind

them with the supplied reuse band [2]. Cut out the

excessive portion of the band.

[1]

F-1-21

15) Route the bound repeating harness [1] as shown,

and secure the reuse band [2] to the host machine.

[2]

[1]

[2]