Canon iR1018 Procedimento de instalação - Página 16

Procurar online ou descarregar pdf Procedimento de instalação para Scanner Canon iR1018. Canon iR1018 20 páginas. Ir1018/1022 series ir2018/2030 series
Também para Canon iR1018: Brochura e especificações (8 páginas), Manual de serviço (29 páginas)

Imprimir página

Chapter 1　

When tightening the screws, take care not to damage

the repeating harness A.

11) Slide the card reader cover [1] to attach it to the

card reader mount.

F-1-17

Route the repeating wire A [1] as shown below.

F-1-18

12) Using the supplied binding screw (M4x6)[1], se-

cure the card reader cover [2].

[1]

F-1-19

13) Connect the connector of the repeating harness A

[1] to the connector J317 [2] on the image processor

PCB.

[2]

F-1-20

14) Form the repeating harness A [1] into four loops

with a diameter of about 4 cm (B), and then bind

them with the supplied reuse band [2]. Cut out the

excessive portion of the band.

[1]

F-1-21

15) Route the bound repeating harness [1] as shown,

and secure the reuse band [2] to the host machine.

[2]

[1]

[2]