Air Hogs Havoc Heli Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo Air Hogs Havoc Heli. Air Hogs Havoc Heli 4.
Anche per Air Hogs Havoc Heli: Manuale di istruzioni (4 pagine)
Stampa la pagina
Tip!
OPERATION
- Your helicopter will be auto-protected while the helicopter crash into other obstacles, you need to switch ON/OFF button to ON again to
restart the helicopter.
- Don't operate the helicopter under the direct sun or strong lighting; it will affect the control system of your helicopter.
- Don't cover the lens of the transmitter. No signal will be released while you cover the lens.
- Don't stick any other label onto the helicopter; the other label will affect receiving of IR signal.
Tip!
CONTROLLING
- For controlling the sticks on transmitter, try not to push the sticks immediately to the extreme position. It should be like steering a bicycle rather than
pressing computer game sticks.
- For the novice Pilot (after the trimming procedure was completed), it is highly recommended to focus exclusively on learning to control the Throttle
stick first. Even if the helicopter may turn around a bit by itself, there is no need to keep it straight and keep it fly nicely. For the first flight, it is
important to learn to keep the helicopter at a constant altitude of around 1 meter with small inputs on the Throttle stick. Once the Pilot masters this,
he may start learning to take control with the direction stick.
Tip!
SAFETY
- Read through the whole instruction Manual before starting to play your helicopter.
- This product is designed to be used only indoors. Do not use it outdoors unless in windless days without any small gusts of wind.
- Never fly in a place cluttered with obstacles (place full of furniture, people, pets etc.)
- Make sure you and other people keep 1-2 meters away from the helicopter while you start for flight.
- Always keep an eye on the flying helicopter to prevent it flying, landing or crashing on or near your head, your body and any other people.
- Never disassemble or attempt to modify the product. It may damage the product and cause danger.
- Never put hands or face close to rotating parts. Doing so create the risk of unexpected injury. To avoid such risk, never operate this product while
sitting on the floor or on a chair. Operate this product in a posture that allows you to quickly get out of the way if necessary.
- Always switch off both the flying unit and transmitter when leaving transmitter unattended. If the power switch is left on, it is possible that
unintended stick operation occurs, when the transmitter is placed on a floor or a chair.
- Never allow young children to use this product. Doing so creates the risk of accidents caused by the rotating parts.
- Never use parts that are damaged or have altered shape in this product to ensure safe practice.
Tip!
TRIMMING
- The helicopter can be out of trim after some severe or multiple crashes, improper storage or changing of temperature... etc.
You can simply solve this problem following the below procedures.
i) If the helicopter takes too much forward speed by itself
ii) If the helicopter takes too much backward speed by itself
Trouble Shooting
Trouble Shooting
Symptom
Propeller can't move.
Suddenly stop and drop down when flying.
The helicopter does not react.
Loss of control.
For further questions and problem, please visit our website www.airhogs.com.
Spin Master Ltd., 450 Front Street West, Toronto, ON M5V 1B6 Canada
Spin Master Inc., PMB #10053, 300 International Drive, Suite 100, Williamsville, NY 14221, USA
Spin Master Toys Far East Limited. Rm #1113, 11/F, Chinachem Golden Plaza, 77 Mody Rd.,
Tsimshatsui E., Kowloon, HK
Spin Master Toys UK Ltd., Meadowbank, Furlong Road, Bourne End, Bucks, SL8 5AJ,
United Kingdom
Spin Master France – 36 rue de Silly – 92100 Boulogne Billancourt – France
North American Consumer Information
Phone: 1-800-622-8339
www.spinmaster.com
Step 1:
Take the tail
between fingers.
Step 1:
Take the tail
between fingers.
- ON/OFF Switch is OFF.
- Weak Battery.
- Weak power.
- Channel selection on transmitter is not correct.
- Another Infrared control device using the same
channel.
- Affected by strong lighting.
Step 2:
Twist tail anti
clockwise for
about 30°.
Step 2:
Twist tail
clockwise for
about 30°.
Cause
TM and © 2007 Spin Master Ltd. Air Hogs ® is a
registered trademark of Spin Master Ltd. All rights reserved.
Conforms to product safety standards ASTM F963-03,
EN71 regulatory requirements. Products and colors may
vary. Please retain this information for future reference.
Patent Pending. MADE IN CHINA.
44290-20007609-ENG-IS-R1(0) REV 1
Correction
- Set switch to ON.
- Re-charge the battery pack.
- Re-charge the battery pack.
- Reset the correct channel.
- Avoid these if possible, or choose another place to operate the
helicopter.
- Change another environment to avoid direct lighting.
Step 3:
Release.
90°
Step 3:
Release.
90°
TM