BATTERY LINK MCU080 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Caricabatterie BATTERY LINK MCU080. BATTERY LINK MCU080 8.
Anche per BATTERY LINK MCU080: Manuale (8 pagine)

Stampa la pagina

Operating the Charger

Connecting the charger to a battery in a vehicle:

Ensure the ignition and all of the accessories in the vehicle are switched off. This will maximize the charge

your battery receives. It will also minimize any chance of damage occurring to the vehicles on-board

electronics.

1. Inspect the electrolyte levels in the battery and top up if required. This step does not apply to

maintenance-free batteries.

2. Connect the red positive (+) lead of the battery charger to the positive (+) post of the battery.

3. Connect the black negative (-) lead of the battery charger to negative (-) post of the battery.

4. Plug the battery charger into an AC outlet then switch on mains power to activate the charger.

Battery

capacity

display

Battery

selector

button

Charging

voltage

5. Push the battery selector button to select the type of battery being charged.

6. Charging voltage will display on screen at all times during the charging process.

7. Battery capacity display shows state of charge. All bars illuminated indicates that battery is fully

charged. Red and amber together indicates additional charging required. Red bars only indicate flat

battery.

8. Charger can be left connected to mains power and battery once fully charged. The charger will

maintain battery in fully charged state.

CHARGING POWER