DOTWORKZ HD12-CD-HB Manuale di istruzioni per l'installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Telecamera di sicurezza DOTWORKZ HD12-CD-HB. DOTWORKZ HD12-CD-HB 16.

3.2 Install the supplied domed lens on the hinged lid of the enclosure. Remove the 12 x 6-32 flat

head screws and set aside in a safe place for reinstallation. Remove the metal retaining ring to

expose the seal. Remove the protective film from the domed lens and align the mounting holes

of the dome with the holes in the gasket. Place the retaining ring over the domed lens and align

the holes of the retaining ring with the mounting holes in the domed lens. Reinstall the twelve

6-32 flat head screws and torque them to the appropriate value, making sure to alternate from

one side of the lens to the other when tightening the 12 screws to minimize stresses in the

domed lens.

12 X 6-32

FLAT HEAD

SCREWS

3.3 Plan your cable management before installing the enclosure. Pay particular attention to bend

radii and sealing of cable glands. The cable glands installed on the enclosure can be used as

plugs or break through, multi-hole glands for smaller diameter cables. The cable glands provided

in the hardware kit are designed to accommodate 1 cable per cable gland. The cable diameters

accommodated are 4.3 mm – 11.4 mm. Other cable diameters will require alternative cable

glands to create an environmental seal. It may be required to cut connectors off of terminated

cables and re-terminate a connector on the opposite side of the gland if a connector does not fit

through the prescribed gland.

RETAINING RING

DOMED LENS