Doug Fleenor Design PRESET 10 PORTABLE Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Doug Fleenor Design PRESET 10 PORTABLE. Doug Fleenor Design PRESET 10 PORTABLE 11.
Anche per Doug Fleenor Design PRESET 10 PORTABLE: Manuale d'uso (6 pagine)
Stampa la pagina
PRODUCT OVERVIEW
The Preset Ten Ethernet (PRE10ETHER-A) wall station plays back snapshots of sACN
(E1.31) on four universes. The simple front interface allows the user to control 2,048
individual slots with the push of a button. Static snapshots from any sACN capable
console record into the ten presets. Snapshot play back may be used as an alternative
to a more complex console, or operate along with that same console. Various lockout
topologies make the PRE10ETHER-A ideal in venues requiring untrained users to
control fixtures typically accessed by a more complex console. The PRE10ETHER-A
supports Power over Ethernet (PoE – 802.3af) or a 24-48VDC power input. Station
configuration takes place on a rear facing user interface. Multiple stations may operate
on the same universes, and stations operating on different universes may operate on
the same Local Area Network (LAN).
INSTALLATION
The PRE10ETHER-A installs into a standard two gang electrical wall box. Minimum
dimensions on the inside of the electrical box are 2.9"H × 1.4"D × 3.6"W. Data input and
output takes place over the RJ45 jack. For best possible data rates, a cable capable of
Fast Ethernet (100BASE-TX) is required. The cable must connect the PRE10ETHER-A
to an Ethernet LAN that contains the console and receiving devices.
Power may enter the unit using the Ethernet cable when a Power over Ethernet switch
or injector are used. When utilizing PoE only one cable is required. Installations not
utilizing PoE can use the Auxiliary 24-48VDC input.
Page 2 of 10