Doug Fleenor Design PRESET 10 PORTABLE Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Doug Fleenor Design PRESET 10 PORTABLE. Doug Fleenor Design PRESET 10 PORTABLE 11 сторінок.
Також для Doug Fleenor Design PRESET 10 PORTABLE: Посібник користувача (6 сторінок)
Друкувати сторінку
PRODUCT OVERVIEW
The Preset Ten Ethernet (PRE10ETHER-A) wall station plays back snapshots of sACN
(E1.31) on four universes. The simple front interface allows the user to control 2,048
individual slots with the push of a button. Static snapshots from any sACN capable
console record into the ten presets. Snapshot play back may be used as an alternative
to a more complex console, or operate along with that same console. Various lockout
topologies make the PRE10ETHER-A ideal in venues requiring untrained users to
control fixtures typically accessed by a more complex console. The PRE10ETHER-A
supports Power over Ethernet (PoE – 802.3af) or a 24-48VDC power input. Station
configuration takes place on a rear facing user interface. Multiple stations may operate
on the same universes, and stations operating on different universes may operate on
the same Local Area Network (LAN).
INSTALLATION
The PRE10ETHER-A installs into a standard two gang electrical wall box. Minimum
dimensions on the inside of the electrical box are 2.9"H × 1.4"D × 3.6"W. Data input and
output takes place over the RJ45 jack. For best possible data rates, a cable capable of
Fast Ethernet (100BASE-TX) is required. The cable must connect the PRE10ETHER-A
to an Ethernet LAN that contains the console and receiving devices.
Power may enter the unit using the Ethernet cable when a Power over Ethernet switch
or injector are used. When utilizing PoE only one cable is required. Installations not
utilizing PoE can use the Auxiliary 24-48VDC input.
Page 2 of 10