Doug Fleenor Design RERUN-R3 Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Doug Fleenor Design RERUN-R3. Doug Fleenor Design RERUN-R3 12. Rackmount dmx512 recorder
Stampa la pagina
PRODUCT DESCRIPTION
The Rerun Rackmount is a lighting control station capable of storing up to ten 40-minute shows on up to
4 universes. Shows are recorded by capturing the output of a DMX512 console. The recorded show start
and end points may be trimmed non-destructively. Each show can be set to hold the last look, loop to itself
or link to another show. Shows are started by pressing one of the ten show buttons.
The Rerun Rackmount can be built to support multiple universes of DMX512. As many as four universes
can be supported in a single 1U chassis. The Rerun-R1 supports 1 universe of DMX512, the Rerun-R2
supports 2 universes of DMX512, the Rerun-R3 supports 3 universes of DMX512, and the Rerun-R4
supports 4 universes of DMX512. Expansion units may be added via a 3-pin XLR connector on the rear
of the chassis in order to support additional universes.
The Rerun Rackmount occupies 1U of rackspace, and comes standard with rack ears for easy installation.
Also included is a clear security panel designed to block unintended button presses. Preset 10 remote
stations can be added to remotely select shows. Power to the Rerun Rackmount is provided by the
attached wall power supply.
The Rerun Rackmount system can work in conjunction with a lighting console, automatically switching
between recorded shows and console control. When the console generates DMX512, the Rerun
Rackmount retransmits the incoming DMX512 data. Thus the console operates normally. Upon loss of
DMX512 from the console, the Rerun Rackmount starts its previously active show.
Rerun also is available in an architectural version (model RERUN-A) and a portable version (model
RERUN-P). The Rerun Architectural and Rerun Portable units can each support one universe of DMX512
data.
Page 2 of 12