Baumer PMG10P Istruzioni per il montaggio e il funzionamento - Pagina 14

Sfoglia online o scarica il pdf Istruzioni per il montaggio e il funzionamento per Convertitore multimediale Baumer PMG10P. Baumer PMG10P 36. Absolute encoder
Anche per Baumer PMG10P: Istruzioni per il montaggio e il funzionamento (32 pagine), Istruzioni per il montaggio e il funzionamento (32 pagine), Manuale operativo (44 pagine), Manuale operativo (44 pagine), Manuale operativo (40 pagine), Manuale operativo (40 pagine), Manuale operativo (40 pagine), Manuale operativo (36 pagine)

MOUNTING

4.3

Maximum permissible mounting tolerance when the Baumer Hübner K 35 spring

disk coupling is used

Devices with a solid shaft should be driven through the Baumer Hübner K 35 spring disk

coupling (accessory), that can be pushed onto the shaft without axial loading�

The figure below shows the device with EURO flange B10, the same maximum

permissible mounting tolerances are valid with housing foot B3�

)

The device must be mounted on the drive with the least possible angular error and

parallel misalignment�

)

Risk of damaging the ball bearings

Coupling components must not be driven onto the shaft with improper force (e� g�

hammer impacts), because of the risk of damaging the ball bearings�

max

Admissible

parallel misalignment

* With insulated hub

All dimensions in millimeters, unless otherwise stated�

11/29

= 10 N

2-10

Admissible

angular error

MB245EN - 11171693, 19A3, Baumer_PMG10-SSI_II_EN

Admissible

axial movement

±0.7 (±0.3*)