Douglas Dynamics SnowEx Automatixx SPEEDWING 77740 Manuale di istruzioni per l'installazione - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Spazzaneve Douglas Dynamics SnowEx Automatixx SPEEDWING 77740. Douglas Dynamics SnowEx Automatixx SPEEDWING 77740 17.
Stampa la pagina
OPERATIONAL TEST AND FINAL ADJUSTMENTS
CABLE ADJUSTMENT
1. Angle the blade fully left and inspect the area
between the driver-side wing stop and the
driver-side blade rib.
Grease
Fitting
2. If there is a gap between the wing stop and the rib,
skip to Step 3.
If there is no gap, return the blade to the straight
position and loosen the 3/4" jam nut and 3/4" hex
nut on the end of the cable 1/4 turn. Repeat this
adjustment until a gap can be seen.
Lit. No. 52308, Rev. 06
3. Return the blade to the straight position and adjust
4. Continue making this adjustment until the wing
Rib
Wing Stop
12
the hex nut 1/4 turn clockwise. Angle the blade
fully left and inspect the area between the wing
stop and the rib again.
stop just contacts the rib when the blade is fully
angled left.
Wing stop must just contact
rib when blade is fully angled.
Rib
May 1, 2021