Baumer OM30 Manuale operativo - Pagina 11

Sfoglia online o scarica il pdf Manuale operativo per Strumenti di misura Baumer OM30. Baumer OM30 48. Laser distance sensors

Baumer

3.4

Operating and display elements

3.4.1

Des.

POWER

ALARM

OUTPUT

In the factory settings, the OUTPUT (pin 4), and thus also the yellow LED, follows the function

of the alarm output. Alternatively, you can select the function of the switching output for the

OUTPUT and the yellow LED.

3.4.2

Instead of parameterizing the sensor via the IO-Link, you can configure the sensor via the

Teach button. Adjustable parameters:

Analog measurement field

Zero position

Resetting the sensor to the factory settings

INFO

You have the additional option of adjusting the mode of the Teach button via IO-Link. You have

a choice between Xpert (factory setting) and Xpress mode. For more information, see

of the Teach button

The teach button is automatically deactivated after 5 min (the timeout can be parameterized via

IO-Link). When the teach button is pressed for longer than 12 seconds, the sensor enters oper-

ating mode without performing a parameterization.

Parameterization via the Teach button is done according to the procedure described in the fol-

lowing.

OM20/OM30 | V1

Illuminated

Green

Sensor ready for operation

Red

No valid signal within the measurement

range

Yellow

No valid signal within the measurement

range

[} 36].

Operating Manual

Description

Blinking

Critical signal quality

Function