Advance Welding AW315 Manuale dell'operatore - Pagina 10

Sfoglia online o scarica il pdf Manuale dell'operatore per Accessori per la saldatura Advance Welding AW315. Advance Welding AW315 15.

AW315

AW315 - Operator Manual

Error 6. Low welding current.

The unit has detected a low welding current as follows:

1.5% low, fail in 3 seconds.

90% low, fail in 1 second.

• Make sure that the correct fittings are being welded.

• If multiple welding fittings, make sure the combined diameters do not exceed

200mm.

• Make sure the supply is within limits: 110 volts with a capacity of 3500 watts.

• Make sure any extension leads being used are the correct length and rating.

Error 7. High welding current.

The unit has detected a high welding current as follows:

1.5% high, fail in 3 seconds.

6.25% high, fail in 2 seconds.

12.5% high, fail in 1.5 seconds.

25% high, fail in 1 second.

50% high, fail in 0.3 seconds.

• Restart the weld after the fitting has returned to ambient temperature.

• If the fault persists, return the unit to an approved service agent.

To reset the unit after an error, press and hold-in the Start/Stop button for five

seconds.