AMPHIBICO genesis fs-700 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories AMPHIBICO genesis fs-700. AMPHIBICO genesis fs-700 17. For the sony nex fs-700
Stampa la paginaMOUNTING THE PORT
Before mounting the port on the housing always ensure that the port O-ring is clean, lubricated and proper-
ly seated in its groove and that he sealing surface on the housing is clean and free of physical damage.
The GENESIS HD Digital Housing System features a bayonet mount #17 equipped with a locking mechanism
#18 If there is already a port or extension mounted on the housing and you wish to remove it, simply pull
the lock lever (# 18) until it stop, rotate the port counter clockwise and carefully pull out, and put it aside in
a safe place with the port lens delicate surface protected.
To mount the port or extension ring simply:
1. Place the housing on its back on a soft steady surface.
2. Place the port or extension ring inside the main port of
the housing. Align one of the four alignment notches with the
opening of the housing.
3. Place your hands on opposite sides of the port or
extension ring.
4. Push with even force on both sides of the port or exten-
sion ring until you feel it snap into place. Make sure the
bayonet is completely inside the housing.
5. Turn the port clockwise until it stops. Do not force, if there is too much resistance takes the port off, check
the O-ring and retry.
6. Check to ensure for the proper seating and sealing of the port or extension and that it is safely locked
on the housing.
Note: It is recommended that you familiarize yourself with this mount by trying it without the camera;
this will allows you to see the inside view of the bayonet mount and of the ports or extension rings in the
housing.
Page 6