- ページ 7

カメラアクセサリー AMPHIBICO genesis fs-700のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AMPHIBICO genesis fs-700 17 ページ。 For the sony nex fs-700

MOUNTING THE PORT

Before mounting the port on the housing always ensure that the port O-ring is clean, lubricated and proper-

ly seated in its groove and that he sealing surface on the housing is clean and free of physical damage.

The GENESIS HD Digital Housing System features a bayonet mount #17 equipped with a locking mechanism

#18 If there is already a port or extension mounted on the housing and you wish to remove it, simply pull

the lock lever (# 18) until it stop, rotate the port counter clockwise and carefully pull out, and put it aside in

a safe place with the port lens delicate surface protected.

To mount the port or extension ring simply:

1. Place the housing on its back on a soft steady surface.

2. Place the port or extension ring inside the main port of

the housing. Align one of the four alignment notches with the

opening of the housing.

3. Place your hands on opposite sides of the port or

extension ring.

4. Push with even force on both sides of the port or exten-

sion ring until you feel it snap into place. Make sure the

bayonet is completely inside the housing.

5. Turn the port clockwise until it stops. Do not force, if there is too much resistance takes the port off, check

the O-ring and retry.

6. Check to ensure for the proper seating and sealing of the port or extension and that it is safely locked

on the housing.

Note: It is recommended that you familiarize yourself with this mount by trying it without the camera;

this will allows you to see the inside view of the bayonet mount and of the ports or extension rings in the

housing.

Page 6