Amplico Impact-C Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Desktop Amplico Impact-C. Amplico Impact-C 12. Impact-c tower pc system
5.9 Memory problems
If you receive an insufficient memory message:
STEP 1 - SAVE AND CLOSE
Save and close any open files and exit any open programs you are not using to see if that resolves the problem.
STEP 2 - REFER TO SOFTWARE MANUFACTURER HANDBOOK
See the software documentation for minimum memory requirements. You may not be able to run that program
on this PC.
STEP 3 - CONTACT TECHNICAL SUPPORT
If none of the previous steps have resolved your problem, please call the Amplicon technical support line on
0844 324 0617.
5.10 Video and Monitor Problems
PLEASE NOTE: See the monitor documentation for additional troubleshooting procedures before calling
Amplicon technical support.
THE SCREEN IS BLANK
STEP 1 - CHECK THE MONITOR CABLE CONNECTION
Ensure that the graphics cable is connected as shown on the setup diagram for your computer.
If you are using a graphics extension cable and removing the cable solves the problem, the cable is
defective.
Swap the computer and monitor power cables to determine if the power cable is defective.
Check the connector for bent or broken pins.
(It is common for monitor cable connectors to have missing pins.)
STEP 2 - CHECK THE MONITOR POWER LIGHT
If the power light is off, firmly press the button to ensure that the monitor is turned on. If the power light is lit or
blinking, the monitor has power. If the power light is blinking, press a key on the keyboard or move the mouse.
STEP 3 - TEST THE ELECTRICAL OUTLET
Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
STEP 4 - CONTACT TECHNICAL SUPPORT
If none of the previous steps have resolved your problem, please call the Amplicon technical support line on
0844 324 0617.
THE SCREEN IS DIFFICULT TO READ
STEP 1 - CHECK THE MONITOR SETTINGS
See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetising
(degaussing) the monitor, and running the monitor self-test.
STEP 2 - MOVE THE SUBWOOFER AWAY FROM THE MONITOR
If your speaker system includes a subwoofer, ensure that the subwoofer is at least 60cm away from the monitor.
Amplicon.co.uk
Sales:
+44 (0) 1273 570 220
IT and Instrumentation for industry
Website:
www.amplicon.com
10
Email: