Amplico Impact-C Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Робочий стіл Amplico Impact-C. Amplico Impact-C 12 сторінок. Impact-c tower pc system

5.9 Memory problems

If you receive an insufficient memory message:

STEP 1 - SAVE AND CLOSE

Save and close any open files and exit any open programs you are not using to see if that resolves the problem.

STEP 2 - REFER TO SOFTWARE MANUFACTURER HANDBOOK

See the software documentation for minimum memory requirements. You may not be able to run that program

on this PC.

STEP 3 - CONTACT TECHNICAL SUPPORT

If none of the previous steps have resolved your problem, please call the Amplicon technical support line on

0844 324 0617.

PLEASE NOTE: See the monitor documentation for additional troubleshooting procedures before calling

Amplicon technical support.

STEP 1 - CHECK THE MONITOR CABLE CONNECTION

Ensure that the graphics cable is connected as shown on the setup diagram for your computer.

If you are using a graphics extension cable and removing the cable solves the problem, the cable is

defective.

Swap the computer and monitor power cables to determine if the power cable is defective.

Check the connector for bent or broken pins.

(It is common for monitor cable connectors to have missing pins.)

STEP 2 - CHECK THE MONITOR POWER LIGHT

If the power light is off, firmly press the button to ensure that the monitor is turned on. If the power light is lit or

blinking, the monitor has power. If the power light is blinking, press a key on the keyboard or move the mouse.

STEP 3 - TEST THE ELECTRICAL OUTLET

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

STEP 4 - CONTACT TECHNICAL SUPPORT

If none of the previous steps have resolved your problem, please call the Amplicon technical support line on

0844 324 0617.

STEP 1 - CHECK THE MONITOR SETTINGS

See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetising

(degaussing) the monitor, and running the monitor self-test.

STEP 2 - MOVE THE SUBWOOFER AWAY FROM THE MONITOR

If your speaker system includes a subwoofer, ensure that the subwoofer is at least 60cm away from the monitor.

Amplicon.co.uk

Sales:

+44 (0) 1273 570 220

IT and Instrumentation for industry

Website:

www.amplicon.com

Email: